Prepare for your Certificate of Qualification (C of Q) exam with our authentic 125-question 4-hour simulation. Built precisely to the National Occupational Standard blueprint with 70% pass threshold verification.
📝 125 Exam Questions
⏱️ 4 Hours (240 Mins)
🎯 70.0% Pass Standard
📊 MWA Diagnostic Scorecard
Ready to Test Your Exam Readiness?
Get full access to the complete 125-question timed exam simulator with instant Journeyperson explanations on every question.
Quick Check
1-Mock Exam Ticket
$14.99 CAD
1 full-length 4-hour timed attempt with detailed MWA diagnostic report.
⭐ Most Popular (Save 33%)
3-Mock Exam Pack
$29.99 CAD
3 full mock exams with uniquely shuffled question sets to track week-over-week progress.
2026 RSOS Blueprint Distribution for Plumber (306A)
Major Work Activity (MWA)
Target Questions
Exam Weight
MWA A: Performs common occupational skills
14 Qs
11%
MWA B: Prepares and assembles tube, tubing and pipe
13 Qs
10%
MWA C: Installs, tests and services sewers, sewage treatment systems and drainage, waste and vent (DWV) systems
32 Qs
26%
MWA D: Installs, tests and services water service and distribution
24 Qs
19%
MWA E: Installs, tests and services fixtures, appliances and water treatment systems
17 Qs
14%
MWA F: Installs, tests and services low-pressure steam and hydronic systems
16 Qs
13%
MWA G: Installs, tests and services specialized systems
9 Qs
7%
Total Red Seal Exam Length
125 Questions
100%
Sample Diagnostic Practice Questions
Try these sample questions from our Plumber (306A) question bank. Select an answer to see instant feedback and explanation.
Q1. While solvent-welding Schedule 40 PVC drainage fittings in a commercial mechanical room in Laval, a plumber splashes PVC cement onto the bare forearm. The skin starts to sting and the apprentice runs to the binder of WHMIS 2015 Safety Data Sheets kept by the door. Which section of the SDS gives the immediate first-aid steps for this exposure?
Worked Explanation: WHMIS 2015 SDSs have 16 sections in a fixed order. Section 4, First-Aid Measures, gives the symptoms and the immediate treatment for each route of exposure. Section 7 covers handling and storage, Section 11 the health effects in detail, and Section 2 the hazard warnings and pictograms.
Q2. A new office building in downtown Ottawa is going up where the city storm sewers are near capacity, and the city limits how fast the site may release storm water. The structural engineer has designed the flat roof to carry the weight of water held on it during a storm, and the drawings show no storage tank on the site. Which roof drains will the engineer specify for this roof?
Worked Explanation: Controlled-flow roof drains have weirs that limit the flow, so the roof itself stores the storm water and releases it slowly to the city sewer, which is why the roof is designed for the weight. Siphonic and sump-type drains empty the roof faster, the opposite of what the city wants, and overflow drains are an emergency backup, not the primary control.
Q3. You must drill twelve 16 mm holes, each 100 mm deep, into the cured concrete floor slab of a school washroom to take the wedge anchors for four water closet carriers. The anchor maker's sheet calls for holes drilled with a carbide-tipped bit to the anchor's diameter, and does not allow diamond-cored holes. Which tool should you use to drill the anchor holes?
Worked Explanation: A rotary hammer drives a carbide-tipped bit into concrete with a hammering action and cuts the rough-walled hole a wedge anchor grips. An impact driver hammers around its axis, not along it, and does not drill concrete well; a diamond core is ruled out by the anchor maker; a high-speed steel twist bit with no hammer action dulls at once in concrete.
Frequently Asked Questions — Red Seal Plumber (306A)
Essential examination guidelines, format specifications, and pass requirements for Canadian Plumber (306A) candidates.
What is the passing score for the Red Seal Plumber (306A) exam?
The passing grade across Canada is strictly 70%. On a 125-question examination, you must correctly answer at least 88 questions to earn your Interprovincial Red Seal endorsement.
How many questions are tested and what is the time limit?
The official examination contains 125 multiple-choice questions. Candidates are given 4 hours (240 minutes) to complete the exam, allowing an average of 1.9 minutes per question.
How is this mock exam calibrated to the 2026 RSOS?
Our simulator strictly mirrors the official Canadian Red Seal Occupational Standard (RSOS). Questions are proportional to the actual Major Work Activity (MWA) weighting tested in provincial examination centers, covering trade safety, tools, installations, diagnostics, and code compliance.
What feedback do I receive upon completing the simulator?
You receive an immediate score breakdown by Major Work Activity, highlighting your areas of strength and weakness. The AI Journeyperson Tutor provides detailed procedural and code citations for every question so you understand the technical reasoning behind every correct answer.
Free Study Guide, Formula Reference & 10-Question Readiness Quiz
Want to review Plumber (306A) formulas and take a free 10-question diagnostic quiz first?
Visit our main Red Seal Plumber (306A) Practice Test & Study Guide Hub for the free 10-question readiness quiz, 30-question printable PDF, worked math examples, and 2026 RSOS code reference sheet.