Certifying authority: Alberta Apprenticeship and Industry Training (AIT). Last checked 2026-09-10.
This trade is not on Alberta’s compulsory list, so you may work in it without a certificate. The Red Seal still travels across Canada as a recognised credential, and employers frequently ask for it — but in Alberta it is a qualification, not a licence.
Source: Alberta Apprenticeship and Industry Training (Tradesecrets) — Compulsory Certification Trades
Whether it is required or not, the exam itself is the same paper everywhere in Canada. What your province decides is whether you must hold the certificate, how you apply, and where you sit it.
The Red Seal Occupational Standard sets the split below. It does not change by province.
| Major Work Activity | Weighting | Questions |
|---|---|---|
| MWA A: Performs common occupational skills | 12% | 12 Qs |
| MWA B: Performs planning and layout | 14% | 14 Qs |
| MWA C: Performs concrete work | 16% | 16 Qs |
| MWA D: Performs framing | 20% | 20 Qs |
| MWA E: Performs exterior finishing | 14% | 14 Qs |
| MWA F: Performs interior finishing | 14% | 14 Qs |
| MWA G: Performs renovations | 10% | 10 Qs |
Source: Red Seal Exam Breakdown — Carpenter (403A), red-seal.ca
4 hours, and a 70% pass mark. These are set provincially rather than by the Red Seal standard, and the four hours is the same whether your paper is 100 or 150 questions.
Confirmed against Skilled Trades Ontario’s Exam Preparation Guide and SkilledTradesBC. Check your own authority before exam day.
Booking is handled by Alberta Apprenticeship and Industry Training (AIT); confirm current locations and dates with them.
Our Carpenter (403A) bank is built to the weighting above, with a worked explanation on every question.
Start Carpenter (403A) practice questions → Take the full 100-question timed mock exam →